Danger : Disconnect all power to optical comparator and accessories before starting to work.

This repair should be done by a qualified service person. Please read through all instructions before beginning work.

Before removing the optical comparator fan note the direction of the airflow or if the fan is not working. Look on the fan for an arrow either stamped in the metal or a label indicating the direction of flow. During this replacement you will need to orient the new fan so the airflow is in the same direction. Disconnect the three wires going to the profile fan (there should be three round connectors about 6” from the fan, the wires can be separated at this point). Remove the screws holding the old profile fan in place and mount the new fan in place with the airflow in the correct direction. The new optical comparator fan has 5-millimeter threads for mounting or 4-millimeter screws can pass through the threads. Depending on the mounting style used for your optical comparator. Connect the two power wires and green ground wire of the new fan (it does not make a difference which of the black fan wires goes to which of the black and white supply wires). After the fan installation is complete reconnect the power to the optical comparator and accessories. The new fan should run when the machine power switch is turned on.